Do you have a summer event coming up that could incorporate a garden theme? If so, here is an idea for combining my last two published projects, Make a Seed Packet Bouquet and Make Gift Tags Into Recycled Greeting Cards. Presented in a terra cotta plant pot, these “bouquets” could be a garden themed gift, party favor or table decoration. I made these samples because I needed Mother’s Day gifts in a hurry, but variations could be made for garden parties, weddings, tea parties, picnics and more.
In my project Make a Seed Packet Bouquet, I experimented with different embellishments for the corners of the seed packet holders. For this group I punched out a whole bunch of circles with a circle craft punch. Then I stamped a flower stamp on many pieces of colorful scrap paper. I cut the flowers out then glued each to a circle.
Flower stamp credt: 7Gypsies.
I then used the circles on the corners of the seed packet holders by punching a hole in the middle and attaching them with metal brads.
Stamp credits: Flower inside circle, realistic butterflies, bird egg, “Crazy Love” by7Gypsies. “Seeds”, brackets, “love” by CarolynHDesign. “Celebrate” by Making Memories. Scribble flowers and butterfly by Fiskars.
I selected two tags for each seed packet assembly, one smaller and decorative and the other larger and functional with “To” and “From” on the back.
I went to Schnarr’s Hardware to buy terra cotta plant pots and packets of lettuce seeds, then to JoAnn Fabrics and Crafts to buy a bag of natural moss. You can buy florists foam to stick the skewers into, but I had some chunks of scrap styrfoam on hand so I cut them apart with a hand miter saw and stuck a piece in each plant pot.
I wrapped each pot with tissue paper gift wrap that I had on hand, then placed some of the moss on top. I pushed each skewer in through the moss and tissue into the foam, then tied the tags around each “stem” with twine.
How did I decide which seeds to include? I chose a lettuce mix because it can be grown in a small container and harvested as micro greens. I bought two packets and divided the seeds up among the five smaller packets that I made. In order that the recipients would know what the seeds are and how to grow them, I scanned information from the back of the packet into the computer and used graphics software to make this graphic, which I then printed out.
These graphics came from the back of the Botanical Interests brand seed packets that I purchased.
After printing the above graphic I cut out the informational graphics out and glued one to the back of each homemade seed packet.
This project is adaptable to many varieties of seeds and many different themes. I hope you enjoy the ideas!
Here is a new and improved and combined version of a couple of tutorials I wrote in 2016. Enjoy!
Tools and Materials
Seeds, either purchased or home harvested Template for a 2.5 x 3.5 inch envelope, and Seed packet holder template for 2.5 x 3.5″ packet Decorative paper Cardstock Squeegee tool or bone folder Glue stick Scrap cardstock, chipboard, or file folders for backing templates for tracing Clean scrap paper for gluing surface Rubber stamps Stamping ink Punches, stencils or templates for flower, center hole of flower, and leaf. Scissors Cutting mat X-acto or craft knife Metal ruler Pencil Double-sided tape Small hole punch Wood skewers (available in grocery stores) Tape Decorative paper flowers Needle tool or awl – if using brads to attach embellishments Brads Adhesive dots Glue for attaching embellishments Small floral theme embellishments
Instructions
First make the seed packets.
Template for Seed Packet Envelope Small
Download and print out the Seed Packet Template Small. Cut out the template and glue it to scrap chipboard or cardstock for durability with a glue stick. Trim around it with scissors.
Stamping on plain paper. Stamp credits from left to right: handwrting background stamp by Inkadinkado, newsprint by Posh Impressions, Da Vinci frontispiece might be Stampington, Pennsylvania Dutch Border Rubber Stamp by me, and arts and crafts botanical tile pattern at the far right by me.
Take some plain paper or decorative paper with a subtle pattern on it and stamp some background stamps on it in complementary ink colors to make it more interesting. If your paper is interesting enough without this step you can skip it.
I own a lot of rubber stamping ink pads, but I don’t have one for every re-inker in my studio. If you want to save money and/or space, you can just buy a re-inker instead of a pad and apply the ink to a palette with a brayer. Then you can roll the ink onto the stamp, or for small stamps just press it on the inked palette. This works best when you want to do a lot of stamping with the same color – when you only want to do a little bit of stamping a pad is much more convenient. When you’re done stamping, if there is any ink left on the palette you can sprinkle a little water on it, lay down a piece of plain paper and burnish it. It’s a fun way to make interesting backgrounds. You can even draw or stamp or make marks into the ink to do a form of monoprinting. When I first took printmaking class, I got into what I could do with the palette at least as much as the printing blocks that I carved.The picture shows a piece of plexiglass as a palette, I’ve also used at various time palette paper, waxed paper, and the shiny side of freezer paper.
Place decorative paper back side up on your work surface. Place the Seed Packet Template Small that you printed out on the paper and trace around with pencil. Cut out envelope and fold in tabs. A thin ruler or straight edge is a good helper for making folds. Go over the folds with a squeegee tool or bone folder.
Envelpoes cut out before they are folded
With a glue stick, glue all the tabs on the envelope except the top tab. Leave that one open so you can add seeds later.
Fronts and back of assembled envelopes.
Once the envelope is assembled, if the front looks a little plain add some texture stamping along an edge or two. That’s really effective for adding interest.
I added stamping to the edges with some favorite texture stamps.The notebook page border stamp is by 7Gypsies, and the texture at the upper right is by Judikins.
Cut out a narrow strip of paper with a decorative scissors and stamp on it the word “Seeds” surrounded by small brackets. If you don’t have similar stamps in your collection you can use whatever stamps you have that fit the theme. Accent the strip with rubber stamping in lighter colors along the edges.
The Seeds stamp and the brackets are both from my own collection.
Glue the strip across the top of the envelope about a quarter of the way down or whatever looks right to your eye. Trim the ends after gluing if needed.
I glued on the strip that says “Seeds”, trimmed the strips to the edges of the envelopes, and got flower and leaf pieces in place to glue on.
Punch out a flower shaped piece of decorative paper and punch out a paper circle for the middle. Glue circle on flower and glue flower to the front of the envelope. An alternate idea is to cut out a leaf shape and a stem piece to make a leaf design for the front. I used a commercial punch for the flower and a pattern from a paper stack for the leaf. You can use whatever patterns and punches you have that you like if you don’t have these exact designs.
Stamp large brackets around the flower. I used unmounted bracket stamps, so the clear block you see is an acrylic block for temporarily mounting stamps with double sided tape or adhesive bits.
Pictured upper left: bracket stamps on an acrylic block. Upper right: stamping on a seed packet. Even though the clear acrylic block is a bit smudged from use you can still see through it to see where to stamp. The brackets stamps are temporarily attached with adhesive squares. Bottom: Finished seed packets.
Fill the packet with seeds, and write the name of the seeds and if you like growing information on the back of the envelope. You can obtain seeds by buying them in a garden center. This is also a charming way to package seeds you’ve harvested yourself to make a special and personal handmade gift for someone.
Next are holders for the packets
Next make holders so you can suspend the finished seed packets on skewer sticks to display them in a container of some kind. Perhaps a vase as in my example, or maybe a table centerpiece, a gift basket, a plant pot with garden tools or some other special container.
Download the template Seed Packet Holder Template for 2.5″ packet x 3.5″. You might only need to look at it for reference, but if it’s helpful as a cutting guide, cut out and mount the parts on scrap chipboard for durability.
Cut out a piece of card stock of a color that is harmonious with your seed packet, 3.5 x 9 inches. Fold it in half.
Lay the holder piece flat and unfolded on your cutting mat. Cut four diagonal slits through the front of the seed packet holder toward the corners using a craft knife and a metal ruler as a guide.
Punch small holes where indicated on the back of the seed packet.
Push a wooden skewer through the back of the holder so that the blunt end of the skewer ends up inside the holder butted up against the fold. Tape in place.
Slip your seed packet into the front of the holder.
Take four small flower embellishments in colors that go well with your seed packet and attach them to the corners. Depending on what kind of embellishement it is, you could use glue, adhesive dots or brads to attach.
Put double sided tape or adhesive dots along the sides and bottom inside your holder. Fold the front down and press halves together.
Arrange your packets in a vase or other container. You’re done!
