Tag Archives: handmade greeting card

Upcycle the front of a used greeting card

Holiday Crafts, Paper Crafts, Rubber Stamping, Tutorials, Upcycling, , , , , , , , , , , , , ,
Finished cards made by cutting up old Christmas cards

I’ve been working on a series of projects designed to challenge myself to see how many different ways I could upcycle old holiday cards. Usually there is a nice picture on the front, and a sentiment on the inside. Here is how to make a new card out of an old one by recycling the re-usable parts and adding a bit of your own creativity with a little metallic paint, glitter, and rubber stamping ink.

Tools and Materials

Old holiday cards
Templates – Small Rectangular Card #1 or Small Rectangular Card #2
Paper cutter
Scissors
Utility knife
Self-healing cutting mat
Metal ruler
Solid color card stock
Old food lid
Eraser with sharp corners designated for stamping
Clean scrap paper
Metallic acrylic paint
Acrylic medium
Glitter
Glue for glitter
Glue stick
Rubber stamps for corner decoration
Black permanent rubber stamp ink
Optional – heat tool

Instructions

Templates for two sizes of rectangular greeting cards. This image is smaller than actual size. To download the originals, click on Small Rectangular Card #1 (5.25 x 4 inches) or Small Rectangular Card #2 (3.5 x 2.75 inches).

Download and print out one or both the two card templates, Small Rectangular Card #1 or Small Rectangular Card #2. They will help you visualize what size parts to prepare and how to put them together.

Go through some old holiday cards and cut the pictures out of the front of the card, either the 3.5 x 4.75 inch size or the 3.5 x 2.75 inch size. It’s very efficient to make several at a time.

I added metallic paint to the edges of some of my cut out images, and glitter to others. An easy way to apply paint to a straight edge is to squirt some paint onto an old food lid, or other temporary palette. Cover your work surface with scrap paper. Take an eraser with flat sides and sharp edges and dip it in the paint. Stamp a straight line of paint onto the edges of the images. I reserve an eraser for this use because I use this manner of application a lot for acrylic paint and various inks.

While the paint is drying, you might like to edge more of the images with glitter. Squeeze or brush glue around the edge, then apply the glitter and let dry. I made selections from my own glitter stash more interesting by mixing sizes and shapes of glitter particles and adding at least one opalescent color to each blend.

Glitter blends that I mixed up for a variety of Christmas projects.

If you ever need to speed up the drying of paint or glue at any stage for easier handling, you can dry the pieces with a crafting heat tool.

Cut out images edged with metallic paint and glitter.

For each image, cut a piece of cardstock in the size of an unfolded card, and fold it in half. Using a self-healing cutting mat, a utility knife, and a metal ruler, cut a slit in each corner as indicated on the template. It isn’t necessary to draw the lines on the card before cutting – as long as the cuts are close to the right size and placement they should work.

Next insert the images into the fronts of the folded cards by tucking the corners into the slits.

Stamping the corners.

I thought the corners needed to have a bit more interest to them, so I stamped each corner in a mix of acrylic medium with a touch of metallic paint and glitter to add a little shimmer. Then when that addition was dry, I over stamped some decorative stamp dessigns in black permanent ink.

Gluing a sentiment into the inside of each card that I cut from another card.

The last step to finish the cards was to glue a sentiment that I cut from another card into the inside of the card with a glue stick.

You’re done!

Easy Thank You Cards

Paper Crafts, Rubber Stamping, Tutorials, , , , , , , , , , , , , , , , ,
Rubber stamps by Rubber Stampede (Thank You), Hero Arts (flowers) and unknown (passport stamp collage).

My Dad and I are making Thank You cards following the funerals of my uncle Dave and brother Larry. Tom helped a lot too with the gluing. I’m feeling the effects that a lot of people feel after serious grief and trauma: disrupted sleep, fatigue, brain fog, joint pain, muscle pain, etc. These symptoms are normal for some people after trauma and severe stress, apparently, but of course make everyday functioning relatively difficult for a time. A bike ride on Sunday with friends helped a lot. I asked Tom to be my coach and help encourage me to do the ride. He pumped up the bike tires and pumped me up emotionally and took a hot epsom salt bath with me before we got dressed for the ride to help loosen up my stiff and sore body. With that I didn’t need any pain meds like ibuprofen which I had taken from time to time the previous week. He helped me break through a big barrier and function better. I was really discouraged and scared by how sore I was and how bad I felt. I’m very grateful to have a loving husband to help me get over some rough spots and build on little victories to gradually improve over time. This is extremely hard even with help. I hope and pray that people out there who need support can get it from somewhere. As I find grieving and mental health resources online I’ll keep adding them to my self care Pinterest board.

In the meantime, Dad and I are extending the effort to make cards because we have abundant supplies on hand we enjoy using and we find the activity healing and therapeutic. But with not feeling terribly well I had to come up with a card design that was relatively simple so that we would not tax ourselves beyond our current abilities to make them. They are just challenging enough to force us to concentrate a bit but not so hard we want to give up in frustration. I have to take a lot of breaks, but I’m not giving up! Of course if you want to make your own similar cards you could use any suitable sentiment in place of “Thank You” to fit any message you want to send.

Supplies You’ll Need

Blank cards with envelopes – Dad had a whole bunch of envelopes in different sizes already on hand, so we cut plain white paper to the envelope width and folded the pieces in half to fit. If you prefer, you can buy blank cards with matching envelopes at craft stores.

Assorted papers in light, neutral colors for the two largest areas on the card, with subtle patterns on them. The design on the paper should be light enough to stamp on in medium to dark colors.

Assorted papers in more contrasting neutral colors and patterns for the narrow stripe on the front of each card.

Rubber stamping ink in a “harvest gold” color, a taupe color, and black.

Clean scrap paper to help with gluing

Optional – interesting die cuts, design tape (also known a paper tape or washi tape) and stickers for extra interest

Tools You’ll Need

Paper trimmer

Metal ruler for tearing paper

Scissors

Glue sticks

Squeegee, bone folder or burnishing tool

Rubber stamps. My friend Kate recently gave me a large collection of pre-owned stamps. I will gradually be offering some for sale in my online shop as I have time to get them listed. I did set aside some of my favorites to keep for my own collection (of course). To start out my Dad and I selected for these cards two Thank You stamps, two postage related designs, and three wildflower silhouette stamps. Unfortunately I’m not selling the exact stamps I used in this card because I really love them and there were no duplicates in the pre-owned collection Kate gave me, but you can use similar stamps in their place.

Instructions

  1. Glue a narrow strip of paper that is from the higher-contrast selections about 1/3 from either the left or right from the side of the card.

2. Cut and tear out pieces of paper in light neutral colors with subtle background patterns and glue them to the fronts of the cards on either side of the strip you glued down previously. I tore the edges that overlap the central stripes for visual interest. On some of the cards I added some stickers and design tape for a little extra interest if I thought it was needed. As you’ll see in the final graphic featuring variations on the original design, I added some hexagon die cuts I had made some time ago. When I was designing the prototype card, I asked Dad to pick out stamps he liked from my collection, and he also took out these hexagons, so I looked for ways to use a few and I liked them on some of the cards. Trim the paper to the edges of the card front when done gluing.

3. Stamp three flower stamps on the wider background side of the card in harvest gold or similar ink color. My Dad switched to a red-brown ink later in the process which also looked very good.

4. Stamp a Thank You stamp in black, and if you think the card needs a little more interest, stamp postage related designs or some other accent stamps of your choice in a taupe ink color as in my example at the top of this article. You might decide your card needs more or less done to it depending on what background papers you choose. See the graphic below for a bunch of variations that we made.

Here is a collage of some of the cards we made showing how many different ways you can use the same stamps. The additional lower case thank you stamp you see here is by Tim Holtz. Dad did most of the stamping and decided some of the cards didn’t need so much on them which is a fine design choice you can make when the papers are interesting. If you would like to download a high-res version of the above graphic (with more designs on it) to use in projects like stickers or faux postage sheets here is a link:
Printable Thank You Graphics

Additional Resources:

My Pinterest board for Greeting Card Idea and Sketches

My Facebook album for free coloring and paper crafting downloads

With more time and energy, I probably would have created a card that uses stamps that I actually sell, some of which I designed. For now the important thing was to make something nice that is also fast and easy. But if you want to browse my collection of stamps in my Etsy shop here it is: Stamping

Make a Greeting Card With a Star and Arrow

Paper Crafts, Rubber Stamping, Tutorials, , , , , , , , , , , , , , ,

mixed media greeting cards

I designed this project around some collaged stars I had made awhile back while working on my previous tutorial, Making Greeting Cards From Scrap Papers. If you don’t want to make your stars in that style, you can use any paper or cardstock star of your choice.

This card design uses quite a few tools and materials, so if you are going to get them all out you might as well make several. Having extra cards on hand is a real time saver sometimes!

matching_stars_with_card_colors

Supplies:
Cardstock
Assorted small paper scraps
Decorative paper large enough to make envelopes
Tracing paper
Tape, single and double-sided
Pencil
Scrap chipboard
Glue stick
Black rubber stamping ink
Clean scrap paper
Envelope template – free download here for a template that fits a 5.5 inch x 4.25 inch card – Envelope template for Rectangular Card

Tools:
Greeting Card With Star and Arrow Template (free download here)
Paper cutter
Metal ruler
Self-healing cutting mat
Scissors
Rubber stamps with sentiments
Colored pencils
Prismacolor art stix or similar product (like Conte crayons in more than just basic colors)
Sharpie Pen
Sharpie Twin Tip Marker Fine/Ultra Fine
Squeegee or bone folder tool
Rubber stamp Bubble Border Small or other border stamp
Rubber stamp Rounded Squares and Rectangles Border Large or other border stamp
Stencil for the “awesome” arrow – Mini Word Arrows 6×6 Stencil – if you don’t have that stencil, you can use a stamp, stencil or paper of your choice for the small arrow portion of the card.

star_greeting_card_with_arrow

Instructions:

Download and print out my free template, Greeting Card Sketch – Star With Arrow.

Tape tracing paper over the printed out template, and make tracings in pencil over the star portion, the arrows and the shapes on either side of the star.

Write “front” on the tracings before you remove them from the template.

tracings

You’ll use these tracings to transfer your pencil markings onto the the backs of scraps of chipboard to make templates for tracing and masking.

To transfer, place your scrap chipboard pieces face down and flip your tracing paper over so that the back is facing up. Tape in place and go over your pencil lines. When you lift the tracing paper, you’ll have lines you can follow as you cut.

Out of one piece of chipboard, use a utility knife and a metal ruler to cut the two side shapes and the star out.

cutting_from_back

Make yourself templates for the large and small arrows as well.

cut_outs

Put the front of the card on your work surface and tape the stencil/mask over it. With a thin, light pencil outline the star and two side shapes. These light pencil lines will help you line things up in the later steps. Place the large arrow template where you would like it and trace around it too.

outlining_in_pencil

Stamp in black through the mask onto the front of the card, alternating the border stamps you are using.

stamping

Lift the mask to see that portions of the front of the card are partially filling the cut out shapes. This is a technique you can use with stencils or masks you cut yourself or with purchased stencils.

stamped_template_lifted

At this point, you can choose to erase your pencil guide lines, or disguise them by drawing over them with a marker or color pencil. I drew over mine with harmonious colored pencil colors.

green_web

Choose an art stick color and go over your outlines heavily, and the insides of your shapes lightly.

green_web_2

Choose a 1″ x 5.5″ piece of scrap decorative paper in a harmonious color. Fold it lengthwise, apply glue to the back and use it to cover the fore edge of the card.

Trace the large arrow onto a piece of decorative paper and cut it out. Glue it in place on the front of the card.

Take a bright, lighter piece of paper and tape it to your work surface.  Tape your stencil over the paper so that the paper shows through the word “awesome”. Outline the “awesome” arrow and lettering with a black Sharpie pen, then lift the stencil and finish filling in the arrow with the fine tip of a Sharpie double-sided black marker.

awesome

Glue the star and small arrow to the front of the card. Accent the lower and rightmost edges of the star and small arrow with the thick tip of the double-tipped Sharpie marker.

Make an envelope for your card by tracing Envelope template for Rectangular Card onto the back of a piece of decorative paper, then folding it and taping it together. Your’e done!