My bookmark tutorial has been posted on the Canvas Corp Brands Blog. I included a free downloadable PDF template with my tutorial. Enjoy!
Read more:
EMBELLISH A BOOKMARK BY HAND-SEWING FABRIC
Tag Archives: paper crafts
My Entry for the Canvas Corp Brands January Challenge
I’m still new to the Canvas Corp Brands Creative Crew so I didn’t handle the entry process for the January challenge quite right and it’s not on their web page. But that’s ok, I’ll just put my entry here on my blog. The challenge was to make a project based on the prompt “Be Lazy” or “Be Lacy”. I decided to do a couple of scrapbook pages about kayaking for my contribution. Kayaking is often strenuous but there are opportunities for lazy moments when you float around on a lake eating a picnic lunch or let yourself drift downstream for awhile on a river. Almost every time I go floating I take a “foot selfie” to remind myself of how chilled out and relaxed I am on water. It makes the effort of transporting the kayak well worth it!
I do some of my scrapbooking in a memory planner. The pages shown here are 8 1/2 by 5 1/2 inches to fit within the memory planner format I’m currently using. I have a current planner that I carry around with me, and after the pages get used I transfer them to an “archive” volume. I periodically go back and scrapbook photo pages into the “archive” volume as I get time if I didn’t complete them while the pages were current. I use 7gypsies binding rings to assemble the archive volumes because it’s easy to open and close them and add pages as I get them done.
The papers I used in this project include some selections from the 7gypsies Architextures collection and the Canvas Corp Natural Nautical collection. I enhanced the papers with some Tim Holtz design tape, a couple of brads and a couple of sequins.
Here is where you can see the other challenge entries:
JANUARY CHALLENGE “BE LAZY”
Make St. Patrick’s Day Cards
Supplies and Materials
Cardstock and a variety of decorative papers in shades of green
Downloadable templates “St. Patrick’s Day Card 1” and “St. Patrick’s Day Card 2”
Scoring tool
Tracing paper
Chipboard (can be scrap – for making templates)
Flower punch
Small circle punch
Paper flower embellishments
Eyelets
Eyelet setter
Metal ruler
Craft knife and blades (X-Acto or something similar)
Cutting mat
Pencil
Eraser
Rubber stamps (St. Patrick’s Day, appropriate greeting, Celtic designs, spirals)
Stamping ink pads and re-inkers in the following colors: dark brown, shades of green
Acrylic stamp mounting blocks
Double-sided tape
Paper cutter
Awl or needle tool
Small hole punch
Scissors
Decorative scissors
Glue stick
Masking tape
Hammer
Decorative brads
Optional – buttons, white craft glue such as Turbo Tacky Glue, needle, thread
The first part of the process for the pair of cards is to stamp out St. Patrick’s Day and Celtic motifs onto small pieces of scrap paper. Use stamping inks in various shades of green and dark brown. Mix in some neutrals if you want. You can make the backgrounds more interesting with the use of background stamps or techniques such as brayering.
Once you have a quantity of stamped pieces finished and the ink is dry, gather them together with some scraps of paper in various shades of green. Make a collage by gluing these scraps down with a glue stick onto a 1/2 sheet of white cardstock. You can create interest by cutting the scraps into smaller pieces by tearing while using a ruler as a straight edge or by cutting apart with decorative scissors. Burnish your collage periodically with a bone folder under a piece of clean scrap paper so the glue has a nice tight seal. Set aside for now and let the glue dry.
Directions for St. Patrick’s Day Card #1
1. Download and print out the template “St. Patrick’s Day Card #1”.
2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card. Score it and fold it in half.
2. Trace the shamrock from the template onto the back of dark green decorative paper. Cut out the shamrock with scissors. If you want to make several cards, you can trace the shamrock onto chipboard and cut it out to use multiple times for tracing.
3. Trace the half-leaf shape onto chipboard and cut out. Trace onto four different pieces of decorative paper in different shades of green. Instead of pre-made decorative paper you can use some parts of your collage if you want (if you do this be sure to leave at least a 3 7/8″ x 5 1/8″ sized piece intact to use on card #2). Glue the half petals in place as shown on the card sketch in the PDF file.
4. Cut out a narrow strip (3/4″ wide) of light colored paper and stamp or glue a sentiment onto it. Glue this onto a slightly wider (1″ wide) paper strip. Glue to front of card and trim.
5. Glue the shamrock down in place on the front of the card.
6. Punch out a flower shape with a punch and glue down in center of shamrock.
7. Punch out a small circle and glue in place on the strip near the bottom of the card.
8. Punch two holes for eyelets in the center of where the two flower embellishments will go. You can use a small hole punch or a needle tool or awl to start the hole. If the hole is not large enough to accept the eyelet you can enlarge the hole with paintbrush handle or other handy tool.
9. Push the eyelets through the holes and set with the eyelet setter.
Variation – use buttons as embellishments instead of the paper flowers. Attach by gluing with white craft glue then further secure by sewing.
Directions for St. Patrick’s Day Card #2
1. Download and print out the template “St. Patrick’s Day Card #2”.
2. Cut a 8.5 x 5.5″ size piece of card stock to use as the background of your card, score it, and fold it in half.
3. Cut out a 3.75 x 5″ size piece of dark green cardstock.
4. Trace the shamrock from the template onto the back of the dark green cardstock. Cut out the shamrock with a craft knife. If you cut carefully, you can use the cutout to make another card. If you want to make several cards, you can save your first cutout and use it multiple times for tracing.
5. Get your collage out and cut a 3 7/8″ x 5 1/8″ size piece out of it. Position your dark green cutout piece over it and place those on top of your folded cardstock card base. Make sure the three layers line up correctly. If you decide you want a sentiment or other embellishment in the lower left area where there is some space, now would be a good time to add it.
6. Using the printed out template as a guide, poke holes in all three layers with an awl or needle tool.
7. Push decorative brads through the holes and spread prongs on the back side. You’re done!
Some of the rubber stamps and papers I used in this project are by 7gypsies by Canvas Corp Brands and Inkadinkado. The “Good Luck” stamp is by Carolyn Hasenfratz Design and the celtic and spiral stamps are hand carved by me.
If you would like to make envelopes for these cards here is a template that will fit:
http://www.limegreennews.com/documents/templates/envelope_template_rectangular.pdf
Extra tip: If you have heart punches or stencils, you can make a three or four leaf clovers for yet more cards from three or four heart shapes!
See my Pinterest site and past lesson plans for ideas and craft projects.
https://www.pinterest.com/chasenfratz/
http://www.limegreennews.com/lessons.html
Making Greeting Cards From Scrap Papers
Do you have the patience for playing around with lots of fiddly paper bits? If so you might enjoy collecting paper scraps and making them into interesting greeting cards. I’ll show you how gluing small bits of paper to strips of scrap cardstock can give you exciting design options.
Tools and Supplies:
Self-healing cutting mat
Paper cutter
Rubber stamps with greetings and sentiments
Permanent black rubber stamping ink
Clean scrap paper
Bone folder
Glue sticks
Scissors
Metal ruler
Corner rounder
Old food lid to use as a palette
Rubber stamping ink in complementary colors
Rubber eraser with flat sides
Palette knife and/or old credit cards for spreading glue
Yes Paste
An assortment of recycled papers: – here are some suggested sources
Gift wrap and tissue
Gift tags
Books
Calendars
Folders
Used postage stamps
Magazines and catalogs
Old greeting cards
Wallpaper samples
Paint sample cards
Attractive product packaging
Scrapbooking paper scraps
Scraps from your old projects
Paper company sample books and promos
Ephemera from travel – maps, brochures, tickets, etc.
I’ll show you two different card designs that you can make by collaging scraps of paper onto cardstock strips.
Make an assortment of collaged strips
1. Cut some strips from plain scrap cardstock that are 1/2 to 3/4 inches wide. Old folders are a good source of scrap cardstock weight paper.
2. Lay out a bunch of small paper scraps and glue them down in a row down each strip. You might choose papers at random or try to follow a planned color scheme. When glue is dry enough to handle, use a scissors to trim the strips from the back to make the edges even.
3. Choose a color of rubber stamping ink that will help unify your design and squirt a little of it onto an old food lid. Dip the edge of a flat-sided eraser in the ink and apply a line of ink to the edges of your collaged strips. This is a small step that makes a huge difference in the visual appeal of your finished piece.
Instructions to make card design #1:
1. Print a selection of sentiments with permanent rubber stamping ink on strips of light colored paper to use on the card that you make. Select one to use as the main theme of your card.
2. Choose a piece of scrap cardstock or heavy paper to use for the base of your card. Fold it in half. Measure the front of your card.
3. Next select a piece of thin scrap paper that would make a good background for the front of the card. Tear out a piece that is 1/2 inch smaller than the front of your card, using the metal ruler as a tearing aid.
For example, if you fold an 8 1/2 x 5 1/2 inch piece of paper in half, the front of the card will measure 4 1/4 x 5 1/2 inches and the background paper for the front of the card should be 3 3/4 x 5 inches.
4. Next choose a simple shape to put on the front of the card – you could trace around a found object, use a cookie cutter or a stencil as a source. Trace one copy of this shape onto plain scrap cardstock. Make another tracing on the back of a piece of paper that harmonizes with the chosen colors for your card.
5. Cut out both shapes with scissors. Set aside the one in the harmonious color to glue to your card later.
6. Take the shape on plain cardstock and glue your sentiment across the middle or wherever looks best. Just below the sentiment, glue a section of one of your collaged and inked strips from earlier.
7. Moving from the inside to the edges, glue strips of scrap paper in complementary colors on either side of your sentiment and collaged strip for a striped effect. Cut around the base shape to trim when all covered.
8. Using the glue stick glue the colored shape you cut out earlier to the front of the card.
9. You will probably need some more robust glue to hold the collaged and inked shape since all the layers of paper will have made it pretty thick. Use Yes Paste to attach the striped shape to the front of the card. Trim if needed.
10. If needed, glue plain light colored scrap paper to the inside of the card to make a clean area for writing a message.
Instructions to make card design #2:
This second card design is designed to made from a piece of 4 1/4 inch by 8 1/2 inch cardstock.
1. Fold the cardstock in half and the front of the card will end up as a 4 1/4 x 4 1/4 square.
2. Cut a 3 3/4 by 3 3/4 inch square from plain scrap cardstock.
3. Glue a sentiment, a collged and inked strip and scrap paper strips to the cardstock square.
4. Trim around the square and round the corners with a corner rounding tool.
5. Glue the trimmed square to the front of the card with Yes Paste.
Extra Tips and Techniques for working with paper:
Cover up unwanted parts of found papers by laminating with other paper.
You can get wrinkles out of paper by ironing.
How does one glue down delicate tissue paper? Stabilize by gluing to a stiffer piece of paper with a glue stick and smooth out wrinkles with a bone folder.
When working on other projects, if you have leftover paint or ink use it up on plain paper scraps. Save these scraps and add to them whenever you have leftover art media. In time, you will have a lot of interesting scraps to work with.
If your paper project warps or curls, press it between heavy books with clean scrap paper around it to protect both card and books.
Embellishments that can be recycled and used on cards:
Buttons
Thread, string and yarn
Ribbon and trim
Fabric scraps
Wire
Beads and charms
Game pieces
Finally Finished My New Year Cards!
For many years I’ve responded to Christmas Cards by sending out New Year cards – I explained why I do that in this previous blog post: Why I Send New Year Cards Instead of Christmas Cards.
I started this year’s design by collaging small pieces of paper onto scrap paper strips that were about 3/4 to 1 1/4 inches wide. I began with the numbers “2018” which I cut from the 7gypsies papers Paddington Blackfriars and American Vintage: 12×12 State Plates Paper. I filled in the paper strips with assorted scrap papers from my small scrap box.
Next I rubbed on some images from the set Architextures™ Parchment Rub-On – Build which were a good fit for my chosen theme “Let’s build a great 2018!”. I added a bit of Tim Holtz paper tape.
I trimmed my strips with scissors to make the edges as even a possible then I scanned them and used Adobe Photoshop software to refine my trimming job and arranged some of the strips into a rectangular digital collage for the front of the card. I made a selection outline of all the areas with the year numbers and turned up the contrast so that they would stand out more. I added some grid designs and hardware looking graphics using Adobe Illustrator then I saved a PDF file of my cards to take to the printer.
While I was working on the collages for my New Year card, I also completed a project for Canvas Corp Brands. I’ve been selected for the 2018 CCB Creative Crew , the design team that makes samples and comes up with projects for Canvas Corp Brands products. Our first challenge was to decorate a 4 x 4 inch canvas in a way that highlights our personal style.
To create the above decorated mixed media canvas I cut three of my collage strips to fit the 4 x 4 inch stretched canvas from Canvas Corp.
I squirted some StazOn Timber Brown permanent rubber stamping ink onto an old food lid to use as a palette. I used the side of an eraser to print a line of Timber Brown along the edges of each collage strip.
I painted my canvas with yellow acrylic paint and allowed it to dry.
Then I applied Tattered Angels Color Wash paint in Rose Gold with a brush along the sides and around the edges of the canvas.
To finish my canvas, I glued the collage strips to the front with Turbo Tacky Glue and nailed tiny tacks into the corners of each paper piece. All done!
Decorate Gift Packages with Stencils and Chalk
In this tutorial I’ll show you how to make your own stencils from recycled food container lids and use them to decorate personalized gift packages. Many of the stencil designs I used in my demo were traced from nostalgic Christmas cookie cutters that were passed down to me from parents and grandparents. They bring back a lot of happy memories of doing holiday crafts and baking with my Mom. Most of the time making things in preparation for the Holiday was more fun for me than the actual event!
I designed this project to be something you can do with kids, but I think anyone who enjoys being a little bit playful and making eco-friendly packaging would enjoy this – I know that I had a great time!
Read more on the Schnarr’s Hardware Blog:
Decorate Gift Packages with Stencils and Chalk
Make Greeting Cards for Thanksgiving
I finally made a card with the “Happy Thanksgiving” rubber stamp from my Carolyn’s Stamp Store collection. I also experimented with making backgrounds with a paint roller, wood dowels and string. With flower and leaf rubber stamps, some paper tape and scrapbooking paper I made a card design that can be adapted to different fall themes.
Read about how I did it on the Schnarr’s Hardware blog:
Textured Backgrounds For Fall Leaf Greeting Cards
Using paint as a background for journaling pages
I recently made some abstract painted backgrounds for a class I’m going to be teaching at JoAnn Fabrics and Crafts. I will be demonstrating how to make mixed media pages for journaling with acrylic paint, watercolor paint, assorted markers and Fiskars gel pens. I embellished my sample pages further with decorative scrapbooking paper, stickers, paper tape and rubber stamps. The binding rings I used in these samples are by 7gypsies.
I hope these samples inspire you to take a class with JoAnn or experiment with mixed media journal and planner pages on your own!
See these Pinterest Boards for more ideas:
Handmade greeting cards with geometric designs
To design these handmade cards, first from assorted paper scraps I punched out a whole bunch of hexagons in two sizes. I used a lot of geometric patterns and for extra interest some vellum paper printed with black and gold designs. Then I cut out some 1″ wide strips of paper and stamped on the the word “congratulations” from a rubber stamp set made by Tim Holtz.
To the front of my cards, I added other paper accents then glued everything down with glue sticks. I’m pleased with how a touch of translucency here and there from the vellum paper helps add some depth and interest to the simple card designs.
The cards you see here are currently offered for sale in the shipping department at Schnarr’s Hardware in Ladue, MO.
Make a Storage Box Out of Recycled Mat Board
When matting artwork, it’s common to have a lot of mat board scraps left over. I had a number of scraps that were large enough to make small open top storage boxes. If you would like to make one similar, here is how I did it.
You will need:
5 square mat board pieces of equal size
An assortment of collage papers
An assortment of tools for decorating paper – I used stencils, rubber stamps, paint, printmaking ink, markers and colored pencils
Yes Paste
Clean scrap paper
Bone folder or Squeegee multipurpose tool
Old credit card or your favorite glue-spreading tool
Acrylic medium
Paint brush
Tim Holtz Idea-ology Metal Box Corners – they come in a package of 8 and you’ll need 4 corners per box
Pencil
Awl
Chunk of old wood
Metal corner braces
Old belts or strips of leather or faux leather
Metal brads
First take your five mat board pieces and decorate both sides with collage papers combined with the paper embellishing techniques of your choice. Use water resistant inks because you’ll be applying acrylic medium over your collages later. Yes Paste is my favorite glue for sticking down large pieces of paper that have to look flat and free of wrinkles. I apply the glue with a credit card to get a nice thin layer then after laying down the paper piece I’m gluing I put a clean piece of scrap paper on top and burnish with a bone folder or Squeegee tool to get a tight, flat seal.
While working on this project at Perennial, another member asked me where I get my paper ephemera. The short answer to that question is that I’ve been collecting papers since the year I first got turned on to making collages – 1985! A more involved answer is to suggest some of the following sources of interesting papers:
- Old magazines and catalogs.
- Is someone you know doing some major cleaning? Offer to help in exchange for keeping interesting papers. This is a good way to get old graphic design samples, newspapers, books, maps, photos, negatives, stamps, envelopes, tickets – all kinds of neat stuff.
- Purchase some reproduction ephemera from a craft supplier.
- Save your art and paper craft “failures” and experiments. Whenever you have extra paint or ink, add a little more embellishment to your scraps until you get something you like. Toward the end of this article are examples of some great results I got using this method – Fun With Stencils.
- Check thrift stores, estate sales, garage sales, flea markets, etc.
- Shop a teachers resource recycling center like Leftovers, etc.
- Make your own with any paper technique that you like, or a combination of techniques, such as rubber stamping, stenciling, painting, printing, making paste paper, rubbings, handmade paper, computer printouts, cyanotypes or drawing.
- Use the decorative paper pads commonly sold for scrapbooking. There are designs for every taste and decorating style.
When you are satisfied with your designs, brush both sides of your mat board pieces with acrylic medium for durability and let dry.
Next start assembling your box from the bottom up, using the box corner hardware and the metal brads included in the package. Use a pencil to mark where the holes go and punch out the holes with an awl. An old chunk of wood is handy for protecting your work surface from the awl point. Be carful with the awl and aim it away from yourself while pressing down and through. Push brads through holes and spread the tines from the inside of the box to assemble the four bottom corners.
At this point the top four corners are loose and flapping so you’ll need something to stabilize them and keep your box shaped like a cube. At Perennial I rummaged through the spare hardware bins and found a couple of metal corner braces which worked wonderfully when attached with brass brads. There were only two available so I looked for something else for the other corners. You can buy metal corner braces at a hardware store and use them on all four top corners if you like.
At Perennial there is a box of old belts and belts have holes! Idea! I selected some to cut down and use on the other corners. Attached with brads, they work well with the “grunge” look of my boxes. If you lack old belts, you can use a variety of materials that can be cut into strips and have holes poked in it – plastic from old lids, scraps of faux leather, scraps of real leather, thin metal – what do you have lying around that you want to try?